How to install Lifechaser LC63T dash cam in a car?
Front Camera
1. Power the camera by the cigarette power cord in package and connect to car cigarette lighter. Plug the mini USB connector in the front camera.
2. The front camera is installed on windshield by the suction cup mount or adhesive mount.
3. If installed by adhesive mount, please stick the static sticker film on windshield firstly. Then stick the adhesive mount on the static sticker film. The static sticker film is much easier to remove than the adhesive mount from windshield.
4. Please watch the YouTube video to check how to hide dash camera's wires.
Rear Camera
1. Please note that just need to plug the rear camera in the "AV IN" port on front camera then it will work.
2. After you plug the rear camera in the "AV IN" port, you could press "UP" button on the display to change the screen display mode (Front full, Rear full, Front large Rear small, Front small Rear large).
3. The rear camera is waterproof and you can install outside vehicle, somewhere like the upward side or around license plate. You can also install on the back window inside vehicle. But it is not an interior view camera.
4. Tighten the two small screws on the rear camera and then adjust rear view angle. Before sticking on the back window, please make sure the correct direction.
5. Stick the static sticker film on back window. Then stick the rear camera on the static sticker film by the small adhesive tape.
6. With regard to the red cable, the rear cam can still work even if you don’t connect it with reversing lamp leads. But if you connect it with reversing lamp positive leads, the dash cam screen will show full back view when you back up your vehicle. It works like back-up camera. So if you don’t need that, you don’t need to connect the red cable.
7. If you want full back view when you back up your vehicle, please connect red cable with reversing lamp positive lead. Please ask for professional help if you don’t know how to connect, especially if you are not sure where the reversing lamp lead is.
If you have any questions, please send us email at junjie.amazon.us@gmail.com. 24/7 online. Happy to help you.
1. Power the camera by the cigarette power cord in package and connect to car cigarette lighter. Plug the mini USB connector in the front camera.
2. The front camera is installed on windshield by the suction cup mount or adhesive mount.
3. If installed by adhesive mount, please stick the static sticker film on windshield firstly. Then stick the adhesive mount on the static sticker film. The static sticker film is much easier to remove than the adhesive mount from windshield.
4. Please watch the YouTube video to check how to hide dash camera's wires.
Rear Camera
1. Please note that just need to plug the rear camera in the "AV IN" port on front camera then it will work.
2. After you plug the rear camera in the "AV IN" port, you could press "UP" button on the display to change the screen display mode (Front full, Rear full, Front large Rear small, Front small Rear large).
3. The rear camera is waterproof and you can install outside vehicle, somewhere like the upward side or around license plate. You can also install on the back window inside vehicle. But it is not an interior view camera.
4. Tighten the two small screws on the rear camera and then adjust rear view angle. Before sticking on the back window, please make sure the correct direction.
5. Stick the static sticker film on back window. Then stick the rear camera on the static sticker film by the small adhesive tape.
6. With regard to the red cable, the rear cam can still work even if you don’t connect it with reversing lamp leads. But if you connect it with reversing lamp positive leads, the dash cam screen will show full back view when you back up your vehicle. It works like back-up camera. So if you don’t need that, you don’t need to connect the red cable.
7. If you want full back view when you back up your vehicle, please connect red cable with reversing lamp positive lead. Please ask for professional help if you don’t know how to connect, especially if you are not sure where the reversing lamp lead is.
If you have any questions, please send us email at junjie.amazon.us@gmail.com. 24/7 online. Happy to help you.